Tread Depth Numbers and Why 2/32 Is Not the Goal
What tread depth in 32nds of an inch means for wet and snow grip, why a tire under 2/32 fails a Maryland safety inspection, and when to start shopping.

What the Numbers Mean
Tread depth is measured in 32nds of an inch. A deeper groove moves more water and slush, so the number tells you how much of that ability is left.
| Tread Depth | Condition | What It Means |
|---|---|---|
| 10/32 or more | Excellent | New or nearly new tires |
| 6/32 | Good | Fine for dry roads, reduced wet performance |
| 4/32 | Fair | Wet traction is noticeably lower |
| 2/32 | Barely Passes | At the wear limit, unsafe in many conditions |
| Under 2/32 | Fails Inspection | Must be replaced |
A tire with less than 2/32 of an inch of tread in any major groove fails a Maryland safety inspection, and so does a tire with exposed cord or a bulge or knot showing the tire is separating. That is the floor, not a target. At 2/32, traction on wet pavement and snow drops sharply, which is why many experts recommend replacing tires at 4/32 or 6/32 for better wet performance.
Why 2/32 Is Not the Goal
The 2/32 figure was chosen because wet traction falls off quickly below it. That does not mean a tire at 3/32 is fine. Grip on wet roads and in slush declines steadily as the tread wears, so a tire close to the limit works hardest in exactly the conditions Maryland throws at us in late autumn and winter: cold rain, wet leaves and the odd icy morning.
If you are near 4/32 going into winter, treat that as a reason to shop, not a reason to wait. Our tire maintenance guide covers the rest of the checks, and you can browse tires for cars and crossovers in the catalog.
Frequently Asked Questions
Anything less fails a Maryland safety inspection, and even 2/32 is not a safe target. Wet and snow traction fall off sharply at that depth, and many experts suggest replacing tires at 4/32 to 6/32.
Ready for a Fresh Set?
Browse the tire catalog or book an appointment and we will check your tread before you decide.