Buying Guides

What to Check on Any Used Tire Before You Buy

What to look for in any used tire, from any seller, before you agree to buy it: tread depth across the width, age, repairs and damage, and age limits.

XFacebook
Isometric illustration of a penny standing in a worn tread groove, head fully showing

What to Look for in Any Used Tire

When you are looking at any used tire, from any seller, check these before you agree to anything.

  • Tread depth. Measure across the width with a gauge, not by eye, and check the inner and outer edges as well as the middle. Look for the raised wear bars sitting level with the tread.
  • Age. Find the date code and read it. If you cannot find it or it is worn away, treat that as a reason to pass. A tire with good tread can still be too old to trust.
  • Sidewall condition. Look for bulges, cuts, cracking, deep scuffs and damage near the bead. A bulge means internal separation and the tire is done.
  • Uneven wear. Wear on one edge, cupping or a bald center tells you what the tire went through, and it limits the life it has left. If the cause was never fixed, the next tire will wear the same way.
  • Plugs and patches. Ask to see the inside of the tire. A plug alone is a temporary fix, a patch applied from the inside is the proper repair, and several repairs close together or anywhere near the shoulder or sidewall are a reason to reject it.

Frequently Asked Questions

As much as possible. Anything near 2/32 of an inch is at the end of its life. Many drivers treat 4/32 as the point where wet-road grip drops off, so look for clearly more than that on a tire you are buying.

Ready to Compare Your Options?

Start with your size and your budget, then decide tire by tire. See the new tire options for your vehicle on our new tires page.

Browse New Tires

Credits