Tire Rotation Patterns: Front-to-Back, Cross and X
Front-to-back, cross patterns, the X-pattern and side-to-side swaps: which rotation pattern fits your drivetrain, directional tires and staggered sets.

The Common Rotation Patterns
The pattern is set by what drives the vehicle and what is mounted on the wheels. These are the standard moves. If your manual shows a different one, the manual wins.
Front-to-Back
Each tire swaps ends on the same side of the vehicle. Directional tires use it, because the arrow on the sidewall has to keep pointing forward.
Cross Patterns
On a front-wheel-drive vehicle, the front tires go straight back on the same side and the rear tires cross to the opposite front corners. Rear-wheel-drive vehicles and many 4WD trucks use the mirror image: the rear tires go straight forward and the front tires cross to the rear.
X-Pattern
Every tire moves to the diagonal corner. Many manuals call for it on all-wheel drive, and it is a common option on other vehicles as long as the tires are not directional.
Side-to-Side and Staggered Setups
A staggered setup, with wider tires at the rear, cannot swap front to back because the sizes differ. Swapping left and right works only for tires that are not directional or asymmetric. Tires that are directional or asymmetric must be taken off the rim and remounted to change sides, which is shop work, and some staggered setups with directional tires cannot be rotated at all.
Frequently Asked Questions
Not front to back. You can swap sides only if the tires are not directional or asymmetric. Otherwise, follow your manual.
Ready to Schedule a Rotation?
Skip the jack stands. The tire rotation and balancing page explains the service and how to book it.