Seasonal & Weather
A Ten-Minute Tire Check Before the First Frost
A quick tire check before the first frost: tread depth with a penny, cold tire pressure, the DOT age code and sidewall damage, and how we can help you.

A Ten-Minute Check Before the First Frost
Whichever way you go, run this quick check on the tires you have.
- Tread depth. Put a Lincoln penny head-first into the grooves in several places. If you can see the whole head, the tread is at about 2/32 of an inch, and a tire with less than 2/32 of an inch of tread in any major groove fails a Maryland safety inspection. Many experts suggest replacing tires earlier, at 4/32 to 6/32, because wet and snow traction fall off well before that limit.
- Pressure. Check pressure when the tires are cold, meaning the car has sat for a few hours. Use the number on the driver's door-jamb placard, not the maximum printed on the sidewall. Cold weather can also trigger the tire pressure warning light, so confirm with a gauge instead of assuming a puncture.
- Age. Find the four-digit date code at the end of the DOT number on the sidewall. The first two digits are the week and the last two are the year of manufacture. Some manufacturers recommend replacing tires at six to ten years regardless of tread.
- Sidewalls. Look for bulges, bubbles and deep cuts. A bulge means internal damage and the tire should not be driven on.
Ready to Choose?
See what is available for your vehicle in the tire catalog, or book an appointment and we will help you pick the right type for the way you drive.